Ads 468x60px

Sabtu, 14 April 2012

The 3M plastic and emblem adhesive

Anyone out there got any suggestions on how to mount the "Super" emblems on my Hotshot? The posts are tiny, Fonda at Service Motors, suggested ear ring backs but they are too small. Anyone?

3M plastic and emblem adhesive number 08061 the pro!s choice. The push on clips are available, you may have to do a little searching. I will look in my stash to see if I have that size. There is usually a couple of vendors at larger car flea markets with collections of clips of all size. I'm sure someone has them online if you can figure out what to search for.

The 3M plastic and emblem adhesive will work, I used it on a Ford emblem that I could not easily get to the back of to attach right, but it tends to be permanent and you may regret it some day. I used some devices that come with military insignias and also typical things bikers put on their leather vests. Those that I have on my vest are very old and special to me so I replace the slip-on deals with 1/16 inch wheel collars that are used on my model air planes. They will hold em real well and can also be used on yer Crosley stuff.


See this site if you would like some............

The clips can be found, however if you can't find them, I recommend against any surface adhesive. Those emblems can be hard to replace, and tough to remove using an adhesive. I have used small balls of the 2 part dry epoxy on the inner surface over the pins with great success, Then if you want to remove them later, you can crush the epoxy with a pliers and remove the emblem. I have also attached and removed crests from the nose that way.

0 comments:

Posting Komentar