Hi people, I have a dana 44 in front end on a E350 I believe It's a 1978-79 with coil springs My question is there any away to lift it 2-3 more inches? Do they make taller springs? And where do I find them? Thanks for any input :
International Spring can make you longer springs. You just need to provide them with the spring rating info. located in the drivers door jam and then lift you want. Alcan Spring are good for leaf Springs, but thats just my opinion. I have 1 3/4" higher lift spacers under my springs that aren't ideal, but are doing OK untill I get custom made coils spring from International (this company was receomended to my on this forum). I understand that if you have an E350/E250, you can also use E150 spring towers that are shorter by an inch or so that will give you the same in lift height. You'll have to cut of the rivets and replace them with Grade 8 + bolts. Double check this though. I reckon its easier to have the springs made; less work!I'm sure you can get lift springs or lift spacers. Either for an older bronco or spacers for a new super duty.
International Spring can make you longer springs. You just need to provide them with the spring rating info. located in the drivers door jam and then lift you want. Alcan Spring are good for leaf Springs, but thats just my opinion. I have 1 3/4" higher lift spacers under my springs that aren't ideal, but are doing OK untill I get custom made coils spring from International (this company was receomended to my on this forum). I understand that if you have an E350/E250, you can also use E150 spring towers that are shorter by an inch or so that will give you the same in lift height. You'll have to cut of the rivets and replace them with Grade 8 + bolts. Double check this though. I reckon its easier to have the springs made; less work!I'm sure you can get lift springs or lift spacers. Either for an older bronco or spacers for a new super duty.
0 comments:
Posting Komentar